Stainless Steel Pipes

Description

Arch City Steel & Alloy, Inc brings to you a whole new world of stainless steel. We’re reputable suppliers of stainless steel sheets, plates and pipes. Our rich inventory includes an extensive list of stainless steel products like stainless steel pipes and fittings, tubes, flanges, bar stocks, sheets, plates and hollow bars.

When it comes to our products, we at Arch City Steel & Alloy, Inc make sure that we have few competitors, both in terms of product performance and service quality. If you’re looking for stainless steel sheet and pipe distributors, you’ve come to the right place.

Find Stainless Steel Pipes Of Different Variations

TYPE 304 / 304L STAINLESS PIPE

  • An austenitic chromium-nickel stainless steel
  • General purpose corrosion resistance
  • Non-magnetic except when cold worked

TYPE 304H STAINLESS PIPE

  • Higher carbon than Type 304 for better high temperature creep properties
  • Corrosion resistance same as Type 304
  • Used in high temperature over 1000 degrees F

TYPE 309S STAINLESS STEEL PIPE

  • Superior heat resisting austenitic stainless steel
  • Good for continuous exposure to 2000 degrees F
  • Slightly better corrosion resistance than Type 304

TYPE 310S STAINLESS STEEL PIPE

  • Superior heat resisting austenitic stainless steel
  • Good for continuous exposure to 2100 degrees F
  • General corrosion resistance better than Type 304 and 309

TYPE 316 / 316L STAINLESS STEEL PIPE

  • An austenitic chromium-nickel stainless steel
  • Improved corrosion and heat resistance
  • Improved corrosion resistance to chlorides

TYPE 317L STAINLESS STEEL PIPE

  • An austenitic chromium-nickel molybdenum stainless steel
  • Improved chloride pitting resistance over Type 316
  • Used in Chemical, petroleum, pulp and paper industries

TYPE 321 / 321H STAINLESS STEEL PIPE

  • An austenitic stainless steel that contains titanium stabilizing elements
  • Improved intergranular corrosion resistance
  • Excellent for high temperature service in carbide precipitation range

TYPE 347 / 347H STAINLESS STEEL PIPE

  • An austenitic stainless that contains columbium stabilizing elements
  • Improved intergranular corrosion resistance
  • Excellent for high temperature service in carbide precipitation range

TYPE 410 STAINLESS STEEL PIPE

  • An martensitic stainless steel with high mechanical properties
  • Resist abrasion and wear better than most 300 series stainless steel
  • Fair resistance to general corrosion and oxidation

TYPE 446 STAINLESS STEEL PIPE

  • An high chromium ferritic stainless steel
  • Excellent high temperature resistance to oxidation and corrosion
  • Commonly used in high temperature applications

904L STAINLESS STEEL PIPE

  • An austenitic stainless steel with low carbon content
  • Good resistance to pitting and crevice corrosion
  • Resistance to general corrosion in reducing acids

DUPLEX 2205 STAINLESS STEEL PIPE

  • Dual-phase, 45% ferritic and 55% austenitic stainless steel
  • Good strength, toughness and corrosion resistance
  • Resists chloride stress corrosion cracking

254 SMO STAINLESS STEEL PIPE

  • An austenitic stainless steel with a high Molybdenum content
  • High resistance to pitting and crevice and general corrosion
  • Very high resistance to chloride stress corrosion cracking

AL-6XN STAINLESS STEEL PIPE

  • An austenitic stainless steel with a high Molybdenum content
  • Exceptional resistance to chloride corrosion
  • Highly resistant to saltwater corrosion

Seamless Stainless Steel Pipes and Welded Stainless Steel Pipes

Types: 304, 304H, 304L, 309, 310, 316, 316L, 317L, 321, 321H, 347, 347H, 410, 446, 2205 DUPLEX, 254SMO, AL6XN
Specifications :ASTM A269, ASME SA269, ASTM A312, ASME SA312, ASTM A358, ASME SA358, ASTM A790, ASME SA790

 

1/8IPS1/2IPS3/4IPS1 IPS1-1/2IPS2 IPS2-1/2IPS
SCHTYPESCHTYPESCHTYPESCHTYPESCHTYPESCHTYPESCHTYPE
53045304404468034753041031640304
10304531640220580410531610317L40309
103165321803048044653211032140310
40304103048030980220510AL6XN1034740316
4031010310803101603041030410220540317L
4031610316803161603101030940AL6XN40321
4032110317L80317L1603161031040254SMO40347
803041032180321160317L103164030440410
80310103478034716032110317L40309402205
8031640AL6XN80410160347103214031080304
8032140254SMO804461602205103474031680309
8034740304802205XXH30410220540317L80310
1/4 IPS40309160304XXH31040AL6XN4032180316
SCHTYPE40310160309XXH31640254SMO4034780317L
530440316160310XXH321403044041080321
1030440317L160316XXH347403094044680347
1031040321160317LXXH220540310402205802205
10316403471603211-1/4 IPS4031680254SMO160304
1034740410160347SCHTYPE40317L80304160310
4030440446160220553044032180309160316
40309402205XXH30453164034780310160317L
4031080304XXH310103044041080316160321
4031680309XXH3161030940220580317L160347
40317L80310XXH3211031080304803211602205
4032180316XXH347103168030980347XXH304
4034780317L1 IPS10317L8031080410XXH310
40220580321SCHTYPE103218031680446XXH316
803048034753044030480317L802205XXH321
803098044653164030980321160304XXH347
8031016030410AL6XN40310803471603093 IPS
80316160316103044031680410160310SCHTYPE
80317L1603211030940317L8022051603165304
803211603471031040321160304160317L5316
80347XXH30410316403471603101603215321
3/8 IPSXXH31610317L40220516031616034710AL6XN
SCHTYPEXXH3211032180304160317L16041010254SMO
5304XXH3471034780309160321160220510304
103043/4 IPS10220580310160347XXH30410309
10316SCHTYPE40AL6XN80316160410XXH31010310
40304530440254SMO80317L160 2205XXH31610316
4030953164030480321XXH304XXH317L10317L
40310103044030980347XXH310XXH32110321
403161031040310160304XXH316XXH34710347
40317L1031640316160309XXH321XXH41010410
4032110317L40317L160310XXH3472-1/2 IPS10 2205
4034710321403211603162 IPSSCHTYPE20304
8030440AL6XN40347160321SCHTYPE530440AL6XN
8030940254SMO404101603475304531640254SMO
803104030440446XXH3045310532140304
8031640309402205XXH31053161030440309
80317L4031080304XXH31653211030940310
803214031680309XXH32110AL6XN1031040316
8034740317L80310XXH34710254SMO1031640317L
40 32180316103041031740321
40 34780317L103091032140347
 40 41080321103101034740410

 

3 IPSXXH3474-1/2IPS20304103475321SCHTYPE
SCHTYPE4 IPSSCHTYPE2031610410103045304
402205SCHTYPE4030420317L102205103095316
80254SMO53045 IPS40AL6XN20304103105317L
803045316SCHTYPE40254SMO20310103165321
8030953215304403042031610317L10304
8031010AL6XN53164030920317L1032110309
8031610254SMO532140310203211034710310
80317L1030410304403163030410 220510316
80321103091031040317L40AL6XN2030410317L
80347103101031640321403042031010321
804101031610317L40347403092031610347
80220510317L10321404104031020317L20304
1603041032140304402205403162032120310
16030910347403098030440317L3030420316
1603101022054031080309403213031620317L
160316203044031680310403474030420321
160317L2031640317L80316404104030930304
16032140AL6XN4032180317L4022054031030316
16034740254SMO40347803216030440316STDAL6XN
160220540304402205803476031640317LSTD304
XXH3044030980304804108030440321STD309
XXH31040310803098022058030940347STD310
XXH31640316803101203048031040410STD316
XXH317L40317L8031612031080316402205STD317L
XXH3214032180317L12031680317LXH304STD321
XXH3474034780321120317L80321XH309STD347
XXH410404108034712032180347XH310STD410
3-1/2 IPS40220580220512034780410XH316STD2205
SCHTYPE803041203041202205802205XH317L40304
530480309120316160304100304XH32140310
531080310120321160310100316XH34740316
531680316120347160316100321XH41040321
5317L80317L160304160317L100347XH220560304
10304803211603101603211203048030460316
10309803471603161603471203168031060321
10310804101603211602205120317L80316XH304
10316802205160347XXH30412032180317LXH309
10317L120304XXH304XXH31612034780321XH310
10321120310XXH310XXH321120220580347XH316
10347120316XXH316XXH347140304100304XH317L
40304120317LXXH321XXH2205140316100316XH321
40309120321XXH3477 IPS140321100321XH347
403101203476 IPSSCHTYPE140347120304XH410
403161202205SCHTYPE4030416030412031680304
40317L16030453048 IPS16031012032180316
403211603095316SCHTYPE16031612034780317L
403471603105317L5304160317L14030480321
803041603165321531616032114031680347
80309160317L10AL6XN5321160347140321100304
803101603211030453471602205140347100316
803161603471030910AL6XNXXH304160304100321
8032116022051031010304XXH316160310100347
80347XXH3041031610309XXH321160316120304
160304XXH31010317L1031010 IPS160317L120316
160316XXH3161032110316SCHTYPE160321120317L
XXH304XXH317L1034710317L5304160347120321
XXH316XXH32110220510321531612 IPS120347

 

14030416030410S3044031610304
14031616031610S3106030410316
14032116032110S31660316STD304
16030416034710S317LXH30430 IPS
16031616 IPS10S321XH316SCHTYPE
160321SCHTYPE10304XH3215304
160347530410310803045316
14 IPS5316103168031610304
SCHTYPE10S30410317L10030410316
530410S30910321100316STD304
531610S31020304120304STD316
10S30410S31620316120316XH304
10S31010S317L30304160304XH316
10S31610S321STD30416031636 IPS
10S317L10304STD30922 IPSSCHTYPE
10S32110310STD310SCHTYPE10304
1030410316STD31610S30410316
1031010317LSTD317L10S316STD304
1031610321STD32110304STD316
10317L20304STD347STD304
103212031640304STD316
20304STD30440316XH304
20316STD3096030424 IPS
STD304STD31060316SCHTYPE
STD309STD316XH3045304
STD310STD317LXH3105316
STD316STD321XH31610304
STD317LSTD347XH317L10309
STD32160304XH32110310
STD347603168030410316
STD2205603218031610317L
40304XH3048032110321
40316XH30910030430304
60304XH31010031630316
60316XH316120304STD304
60321XH317L120316STD310
XH304XH321140304STD316
XH309XH347160304STD317L
XH31080304160316STD321
XH3168031616032140304
XH317L8032120 IPS40316
XH321100304SCHTYPE60304
XH3471003165304XH304
803041003215316XH316
8031612030410S304XH317L
80317L12031610S310XH321
8032112032110S31680304
8034714030410S317L80316
10030414031610S321100304
10031614032110304120304
10032116030410316160304
12030416031610317L26 IPS
120316160321STD304SCHTYPE
120321160347STD31010304
12034718 IPSSTD31610316
140304SCHTYPESTD317LSTD304
1403165304STD32128 IPS
140321531640304SCHTYPE

 

Stainless Steel Tube & Pipe Specifications :

 

SPEC. NO.TITLESCOPE

ASTM A 213

ASME SA 213

Seamless Ferritic Stainless Steel and Austenitic  Stainless  Steel  Boiler, Superheater, Heat-Exchanger, and Condenser Tubes.Pressure tubes, made from 16 grades of austenitic stainless steel and from 12 grades of ferritic Cr-Mo Alloy Steel.

ASTM A 249

ASME SA 249

Welded  Austenitic   Stainless  Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes.Pressure tubes, made from austenitic stainless steels, (Types 304, 304H, 304L, 305, 309, 310,316, 316H, 316L, 317, 321, 321H, 347, 347H, 348, 348H, and XM grades.)

ASTM A 268

ASME SA 268

Seamless and Welded Ferritic Stain-less Steel Tubing for General Service.15 grades of ferritic stainless steel tubing for general corrosion resistance and high temperature service. (Types 329, 405, 409, 410, 429, 430, 430Ti, 443, 446, XMs & others).
ASTM A 269
Seamless  and  Welded  Austenitic Stainless Steel Tubing for General Service.13 grades of austenitic stainless,steel tubing for general  corrosion- resisting and  high-temperature service. (Types 304, 304L, 316, 316L, 317, 321,347, 348 and XM grades).
ASTM A 270
Seamless and Welded Austenitic Stainless Steel Sanitary Tubing.Austenitic stainless steel   intended for usein the diary and food industry in sizes up”to andincluding 4 in. in outside diameter.

ASTM  A312

ASME SA 312

Seamless and Welded Austenitic Stainless Steel Pipe.Austenitic stainless steel pipe intended for high temperature and general corrosive service.22 grades are covered.

ASTM A 358

ASME SA 358

Electric-Fusion-Welded Austenitic Chromium-Nickel Altoel for  High-TemperatureFor corrosion and high temperature service, normally not less than 8 in. nominal diameter. Types 304, 316, 309, 310, 321, 321, 347, 304L; 316L, 304H, 316H.

ASTM A 376

ASME SA 376

Seamless Austenitic Stainless Steel Pipe for High-Temp Central-Station Service.Austenitic stainless steel pipe intended for high temperature and general corrosive service. Better surface than A312 pipe.

ASTM A 409

ASME SA 409

Welded Large Outside Diameter Light- Wall Austenitic Chromium-Nickel .Alloy Steel Pipe for Corrosive or High-Temperature Service.Nominal diameter 14-30 in. in Schedules SS and 105. Types 304, 309, 310, 316, 317, 321, 347, 348, 304L, 316L.

ASTM A 450

ASME SA 450

General Requirements for Alloy Steel Tubes.Common requirements for ASTM tubular specifications.
ASTM A 511
Seamless Stainless Steel Mechanical Tubing.27 grades are covered for mechanical applications.  Primarily round tubing.

ASTM A 530

ASME SA 530

General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Pipe.Common requirements for ASTM pipe specifications as listed.
ASTM A 554
Welded Stainless Steel MechanicalTubing.Nineteen grades are covered for mechanical applications. Rounds, squares, rectangles, and special shapes are included.
ASTM A 632
Seamless and Welded Austenitic Stainless Steel Tubing for General Service. Small Diameter.9 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service.
AMS 556
Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347) Hydraulic.Annealed type 347 hydraulic Iin6 tubing.

Type 1—Seamless

Type 2—Welded & Drawn

AMS 5557
Steel Tubing,  Corrosion  and  Heat Resistant  18 Cr; 11 Ni; Ti (SAE30321) Hydraulic.Annealed type 347 hydraulic line tubing.

Type 1—Seamless

Type 2—Welded & Drawn

AMS 5558
Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr; 11 Ni, (Cb  + Ta) (SAE 30348) Thin  Wall.High pressure ducting, wall thickness  or less. Weld bEAD controlled, X-ray.
AMS 5559
Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr, 10 Ni, Ti, (SAE 30321) Thin Wall.High pressure ducting, wall thickness or less. Weld bead controlled, X-ray.
AMS 5560
Steel Tubing, Seamless CorrosionResistant 19 Cr; 9 Ni (SAE 30304).Annealed type 304 aircraft hydraulic line tubing. (Not subject to high pressure). Structural.
AMS 5561
Steel Tubing, Welded and DrawnHigh Pressure Hydraulic.For parts and assemblies such as fluid lines subject to high pressure and requiring corrosion
AMS 5562
Steel Tubing, Seamless Corrosion Resistant 21 Cr; 6 Ni; 9 Mn Annealed.Parts and assemblies requiring both corrosion and heat resistance, and having higher strength than 18-8 types.
AMS 5565
Steel Tubing, Welded, Corrosion Resistant 19 Cr; 9 Ni (SAE 30304).Annealed type 304 aircraft hydraulic line tubing. (Not subject to high pressure). Structural.
AMS 5566
Steel Tubing,  Seamless  or Welded Corrosion Resistant 19 Cr; 10 Ni (SAE 30304) High Pressure Hydraulic.Cold drawn type 304, high pressure, aircraftType 1   SeamlessType 2—Welded Drawn
AMS 5567
Steel Tubing, Seamless or Welded Corrosion Resistant 19 Cr; 10 Ni (SAE 30304) Hydraulic, Solution Treated.Fluid lines subject to medium high pressures requiring corrosion resistance. Annealed.(1) Seamless     (2) Welded & Drawn
AMS 5570
Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti tSAE 30321). Annealed Structural.Parts and assemblies requiring both corrosion and heat resistance especially when such partsare welded during fabrication. Requiring oxidation resistance up to approximately 1500°F., but useful at that temperature only when stresses are low.
AMS  5571
Steel Tubing, Seamless Corrosion andHeai Resistant  18 Cr; 11 Ni; (Cb  + Ta)‹SAE 30347). Annealed Structural.Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500°F., but useful at that temperature only when stresses are low.
AMS 5572
Steel  Tubing,  Seamless  Corrosion  and Heat Resistant 25 Cr; 20 Ni (SAE 30310).  Annealed  Structural.Parts and assemblies requiring both corrosion and  heat  resistance  especially  when  welded during fabrication.  Requiring oxidation resistance up to approximately 2000°F., but useful at that temperature  only when  stresses  are low.
AMS 5573
Seamless Type 316

Annealed  Structural.

Parts & assemblies requiring both corrosion and heat resistance up to 1600ºF.
AMS 5574
Seamless Type 309S

Annealed  Structural.

Parts & assemblies requiring both cofrosion and heat resistance up to 2000°F., especially welded assemblies.
AMS 5575
Steel Tubing, Seamless Corrosion and Heat Resistant 16 Cr; 11 Ni; (Cb + Ta) (SAE 30347). Annealed Structural.Parts and assemblies requiring both corrosion and heat resistance espec[ially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500ºF., but useful at that temperature only when stresses are low.
AMS 5576
Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321).  Annealed  Structural.Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500°F., but useful at that temperature only when stresses are low.
A EBS  5577
Steel Tubing, Welded, Corrosion and Heat Resistant 25 Cr; 20 Ni; (SAE 30310). Annealed Structural.Parts and assemblies requiring both corrosion and heat resistance especially when welded during fabrication.  Requiring oxidation resistance up to approximately 2000°F., but useful at that temperature only when stresses are low.
AMS 5639
Seamless Type 304Cold Finished Mechanical Tube

Rockwell 90B max Hardness Corrosion Embrittlement  Capability

AMS 5645
Seamless Type 321Cold Finished Mechanical Tube

Rockwell 90B  max Hardness

Corrosion Embrittlement Capability

AMS 5646
Seamless Type 347Cold Finished Mechanical Tube

Rockwell 90B max     Hardness

Corrosion  Embrittlement  Capability

AMS 5647
Seamless Type 304LCold Finished Mechanical Tube

Rockwell  90B maxHardness

Corrosion Embrittlement Capability

AMS 5648
Seamless Type 316Cold Finished Mechanical Tube

Rockwell 90B max Hardness

MIL-T-5695
Tubing, Steel, Corrosion Resistant(304),Cold Drawn (1/2 or 1/4 hard Smls or W & D. Intended for use in fabrication of aircraft structural part requiring a high fegree of resisitance to corrosion.
MIL-T-6737 (T 321)
Tubing, Steel, Corrosion and Heat Resistant (18-8 Stabilized), Welded. Annealed.Type 321 and 347 tubing intended   use in the manufacture of exhaust stacks, manifolds, blast tubes,  ring collector  and similar  applications where a weldable corrosion and heat resisting steel is required or for use at 800º – 1500°F.
MIL-T-6845 (T 304)
Tubing, Steel, Corrosion Resistant 304) Aerospace Vehicle Hydraulic ³/  Hard, Seamless, Weldsd Drawn.Intended for use in high pressdre hydraulic and pneumatic systems in which corrosion resistant materials are required. The tubing is not suitable for use in applications assembled by weldin   or brazing or exposed to temperatures higher 800°F.,   because  of   impaired   resistance  to corrosion, where subsequent anneal not possible.
MIL-T-8504 (T 304)
Tubing, Steel, Corrosion Resistant 18-8) Annealed, Aircraft Hydraulic Seamless, Welded.Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required. This tubing is of lower strength and higher ductility than tubin  Speci- fication  MIL-T-6845.  May be used to MIL-T-6845 tubing but heavier wall thicknesses must be used. Same qualifications regarding welding, brazing & temperature.
MIL-T-8506 (T 304)
Tubing, Steel, Corrosion Resistant (304) Annealed. Seamless, Welded.Intended for use in the fabrication of aircraft parts requiring a high degree of resistance to corrosion. Not to be used in high pressure hydraulic control systems.

MIL-T-8606

(T 304L)

(T 321)

(T 347)

Tubin , steel, Corrosion Resistant 18-8 Annealed. Welded & Drawn.Intended for use in applications which require a high degree of resistance to corrosion or to temperatures in the range of 800°F.—1500°F., or in applications which involve welding. Suitable for use In tank-automotive  equipment for hydraulic and mechanical applications.

MIL-T-8808

(T 321)

(T 347)

Tubing, Steel, Corrosion Resistant (18-8 Stabilized), Aircraft Hydraulic Quality. Annealed. Seamless, Welded  &  Drawn.Intended for use in high hydraulic and pneumatic systems where and heat resistance are required and in which welding or brazing may be involved during fabrication. Resists oxidation at temperatures to 1200°F., but is useful at that  temperature  only when  stresses are low.

MIL-T-8973

(T304L)

(T 316L)

(T 321)

(T 347)

Tubing,  Steel,  Corrosion  Resistant, Aerospace Vehicle Hydraulic System. ³/  Hard. Seamless, Welded & Drawn.Intended for use in high pressure hydraulic and pneumatic systems  corrosion and heat resistance are required and in which welding or brazing  may  be  involved  during  fabrication. Suitable for use in temperatures to 1200°F., when stresses  are  low.

MIL-P-1144

(T 304) (T 304L)

(T 316) (T 316L)

(T-321) (T 347)

Pipe, Stainless Steel, (Corrosion Resisting). Seamless or Welded. Annealed.Pipe is intended for high-temperature and hy- draulic or other pressure service under general corrosive conditions.

 

Stainless Steel Tube Data

Chemical Composition

AISITYPE
CHEMISTRY-PERCENT

 

TYPICAL CHARACTERISTICS
C
Mn
P
S
SI
– CR
NI
OTHER
304

0.08

max

2

max

0.04

max

0.03

max

0.075

max

18.00

20.00

8.00

11.00

General purpose “300” series grade for tubing applications.
304L

0.035

max

2 .00

max

0.04

max

0.03

max

0.75

max

18.00

20.00

8.00

13.00

Low carbon type 304 where greater resistance to carbide precipitation is desired.
304H

0.04

0.1

2

max

0.04

max

0.03

max

0.75

max

18.00

20

8.00

11

Carbon modified for improved high temperature strength.
310
0.15 max

2

max

0.04

max

0.03

max

0.75

max

24.00

26

19.00

22

High resistance to scaling and oxida-tion up to 2000°F.
316

008

max

2.00

max

0.040

max

0.030

max

0.75

max

16.00

18.00

11.00

4.00

Mo2.00-   3.00
Better corrosion resistance than type 304 in reducing media. Good hi-temp strength.
316L

0.035

max

2

max

0.04

max

0.03

max

0.75

max

16.00

18

10.00

15

Mo 2.00

3.00

Low carbon type 316 where greater resistance to carbide precipitation is desired.
316H

0_04

0.10

I 2.00

max

0040

max

0.030

max

0.75

max

16.00

18.00

11.00

14.00

Mo2.00-3.00
Carbon modified for improved temperature strength.
317

0.08

Max

2

max

0.04

max

0.03

max

0.75

max

18.00

20

11.00

14

Mo 3.00

4.00

Similar to type 316 but with better corrosion resistance and creep strength.
321

0.48

max

203

max

0.04

max

0.03

max

0.75

max

17.00

20

9.00

13

Ti

5XC-0.60

Titanium stabilized against carbide precipitation. Similar properties to type 304.
347

0.08

max

200

max

0.04

max

0.03

max

0.75

max

17.00

20

7.00

13

Cb + Ta  10XC-1.00
Columbium and tantalum stabilized against carbide precipitation.
21-6-9

0.04

max

8.00

max

60

max

0.03

max

1

max

19.00

21.5

5.50

7.5

N  0.15 0.40
High strength-to-weight ratio. Good corrosion resistance.
416

0.15

Max

1.25

max

0.066

max

0.15

max

1.00

max

12.00

14.00

Hardenable by heat treatment. Free machining. Moderate corrosion resistance.

 

MECHANICAL PROPERTIES

TYPE
ITEMPER
NOMINAL MECHANICAL PROPERTIES

TENSILE

PSI

YIELD

PSI

ELONG.

% IN 2″

ROCKWELL

HARDNESS

304,

Annealed

I 1/8 Hard

85000

105000

35000

75000

55

20

RB80

RB95

304L

Annealed

1/8 Hard

80000

105000

30000

75000

55

20

RB75

RB95

304H
Annealed
85,000
35,000
55
RB80
310
Annealed
95,000
45,000
45
RB85

316

316L

316H

Annealed

Annealed

Annealed

85000

80000

85000

35000

30000

35000

50

50

50

RB80

RB75

RB80

317
Annealed
90,000
40,000
45
RB85
321

Annealed

1/8 Hard

90,000

105000

35000

75000

55

20

RB80

RB95

347
Annealed
95,000
40,000
50
RB85
21-6-9

Annealed

1/8 Hard

100000

142000

60000

120000

45

20

RB9,0

RC30.

416
Annealed
75,000
35,000
20
RB95

The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described here in are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other purposes.

If you want to inquire about Stainless Steel Pipe, then please click here .